Видео

Awesome build

talks at 200km/hr.bullshit

appreciate

I’m wanting to do epoxy resin pour over a vinyl corn hole wrap but have read some say it want bond and will separate. What I’m trying to find out is will it work or not. Or am I just best at applying the wrap and staying clear of using the epoxy. Thanks for any input and information

Ruined a brand new pizza cutter 😂. Masterpiece my shit 😂

will this work for wood that's varnished? or would i need to sand the varnish off first?

any chance of a link to the elephant template please

Nah... not good enough

Very cool

Hi there. I hope you're still tracking comments on this video. I'm likely going to start a project that I was planning on using MDF and a vinyl decal. Your video is great and showed me what to expect. I saw you had a spray bottle of poly. I have a can of brush-on poly --would this be too much moisture for the MDF at once and make it bubble? I also saw some edge banding options that had a bit of a thicker profile, but having trouble finding a supplier. Product is 1/2 inch thickness, coloured vinyl (I believe it's vinyl), thicker in the middle giving it a slightly rounded profile. I think it just applied over the edge and adheres with heat. I'm wondering if you're familiar with this product and know any only suppliers. Thanks so much!

Poly acrylic or Polourathane?? Links above for poly shows the spray bottle?

The self-centering jig you said was around a 1/16" off centre is adjustable. I use one of those myself. There's a threaded locking collar which allows micro-adjustment to make sure the guide block is exactly centred when the jaws are clamped. But I'm sure you would know that.

Wanted to thank you for your video I am going to start on a wood desk and wrapping it with car vinyl seems incoherent but here we go... your video gave me the intel I need to proceed. I'll post in a few weeks. TY

مسخره بازی

خوب ولی ناقص ❤

Funny guy. Don’t mind the humor in your reviews!

This method is just bad. There are much better existing methods to collect the dust, All the dust not just 75%

The proper way to collect dust is from the bottom for heavy particles and from the top using a blade guard. You solution still sprays dust in your face and direction. It is NOT a good solution. Use a "BIG Gulp funnel under the saw and high speed and move a high volume of air through a 4-6" hose. On the blade Guard use a 2/5" hose. Shark Guard makes an excellent guard. Problem solved . No video needed.

4-6 weeks? I need instant gratification dammit!

Cheryl should kick your misogynistic ass.

Thank you

Cool video and really good compared to others. Appreciate you

😂😂😂 What a load of shit.. Who is this clown? 😂

Very biased video towards the ones you don't like! If you took your time using all of the examples, they would work fine!!

I have this exact fan how much to restore mine?

The brass splines are sexy

Why does Cheryl put up with your s***?

Very nice

Pretty cool. Just like in my fishing kayak, I can'i stand an obstructed view; or a bunch of hose/mechanisms hanging over my saw. Now all I need is to invent the Aluminum magnet and I'll be all set!

Thus really took very long with lot of extra work. Not hating but I don't see to many woodworkers using this method

42Fab sent me here. Very cool project!

Can this make a mid panel dowel hole? No one seems to show that so I presume not... thank you!

I drop the guide pin in the first hole to rest it against the reference edge and it’s pretty secure. Drill, then drop the pin into the hole and go about drilling the rest. Sometimes I don’t even have to clamp it as hand pressure is enough. I have the machined aluminum kit and really like it.

Help me out with gaming arcades for the mall. I manufacture them. But the surface finish is dull. I put vinyl directly on hdhmr/mdf board. Can you suggest for thickness of vinyl I should use and how to seal the surface to a smooth finish. Thanks.

That was a great vid. The jig is definitely impressive

Can the wrap go over a cheap piece of furniture made of partial board that has that fake wood sticker stuff on the outside?

Looks great.

Home made idea, I see your using a zero Clarence insert on your saw. This closes off most of the gap a normal table saw insert plate has Its just a narrow gap depending how high the blade is. You have a large insert plate with no holes i it, how about drilling holes and rounding them over to pull down into the table Be it 1/2" or 3/4" using fosner bits This will help make downdraft like a sanding table, the dust flying at you has to be from the back of the blade because the blade has passed down into the table where it should have come off the gullet's Also a soft brush would help loosen them off the blade, Plus you need a powerful dust collection system to help pull the dust into the table saws cabnits My 2017 hybrid Jet proshopII table saw with the orignal insert plate lets most the dust fall to the floor if the vacuumed and dust deputy doesn't catch it. It should do even better with a larger dust collection system and closed bottom saw. The hybrid saws line a closed cabnit but has an open bottom. I don't have an issue kicking dust back at me. Also the type of blade your using plays into it. Deep gullet.

Heat gun doesn’t shrink or warp the vinyl ?

Where can I get those clamps your using...like how quick they clamp down...instead of screw. Thanks you for your time in making video greatly appreciated.

adding the FAKE amusement ruins the video----end of comment

adding the FAKE amusement ruins the video----end of comment

Have you added the slots for the clamps? How did they work out?

Fine detailed review, of a certainly good tool. However, your mannequin is nothing but a running bad and not funny joke.

You should do a comparison with the Drill Pro and see really which one is far more versatile

😅😅

Can you drill holes in a board face for shelves like you can with their "Master Kit" version, or are you limited to edges and corners?

How did you remove the existing top on the tanker desk ?? We have a ton of these desks at our office and this was super cool to see !

The big question is of course if this awesome thing also comes in metric for the rest of the world

I’m not sure about having to use clamps to hole it in place, what keeps it from slipping on the piece when clamping?